MS2N03-D0BYN-CMSH1-NNNNE-GE060N1005BN-NN

Product Description

Designed to provide a torque of 14.5 Nm, the MS2N03-D0BYN-CMSH1-NNNNE-GE060N1005BN-NN from Bosch Rexroth Indramat is a 5700 rpm servo motor that can attain a maximum speed of 9000 rpm. This servo motor comes with a frame of size D and weighs approximately 1.4 kg as this motor comes with a holding brake as well. The holding brake is capable of generating a holding torque of 1.80 Nm to hold the shaft of the motor, preventing it from moving. This brake requires 24 volts DC to operate and can draw around 0.46 amperes of current.

This servo motor comes with a 4096 incremental multiturn encoder that uses the ACURO Link encoder interface. This is a 20-bit encoder interface that can transmit the position of the shaft as well as the temperature of the motor coil. To measure the temperature readings, the MS2N03-D0BYN-CMSH1-NNNNE-GE060N1005BN-NN comes with a PT1000 temperature sensor as the ACURO Link works on the SIL 2 safety protocol to make sure the motor coil doesn't get too hot. In case the motor coil temperature exceeds 145 degrees Celsius, the MS2N03-D0BYN-CMSH1-NNNNE-GE060N1005BN-NN will turn off automatically to prevent the motor coil from burning out, causing shorting and affecting the entire control process.

This motor also offers more safety features, such as Ingress Protection to keep the motor well protected from dust and low-pressure water levels. The motor is also thermally protected thanks to the Class F thermal protection against fires that can reach a temperature of up to 170 degrees Celsius. The manufacturer recommends installing the motor in an area with a temperature between 0 to 45 degrees Celsius to make sure the motor operates under rated conditions.