MS2N03-D0BYN-CMSH0-NNNNE-NN

Product Description

The MS2N03-D0BYN-CMSH0-NNNNE-NN is a 5700 rpm Asynchronous servo motor from Rexroth capable of attaining a maximum speed of 9000 rpm which is great for high-speed robotics and drilling. This servo motor has an efficient torque constant of 0.6 Nm per ampere of current and has a nominal torque rating of 0.68 Nm at 100 K temperature rise from the environment drawing a nominal current of 1.39 Amperes while having a power rating of 0.4 kW. This motor has varying torque ratings depending on the temperature it is operating in. The rated operating temperature of this motor is between 0 degrees Celsius to 40 degrees Celsius.

To make sure the motor stays sealed and its internals protected from harsh industrial factors, the MS2N03-D0BYN-CMSH0-NNNNE-NN has an IP 65 International Protection class. This protection keeps the motor safe from large dust particles of up to 2mm and can also provide protection against moisture, keeping the internals of the motor from rusting over time, prolonging the motor's life. The motor also comes with a Thermal insulation class of F that keeps this motor protected from fires of up to 170 degrees Celsius. The Thermal time constant of this motor is 100 minutes which is the time it takes for this motor to attain 63.5% of its steady-state temperature.

To track the motor shaft accurately during operation and to command the motor to move to a particular position, the MS2N03-D0BYN-CMSH0-NNNNE-NN relies on ACURO link digital encoder interface. This interface helps establish a duplex communication channel that not only shares the encoder position values but also the temperature of the motor as this motor also comes with a PT1000 temperature sensor.