Product Description
The MS2N03-B0BYN-CSDL0-NNNNN-NN synchronous servomotor from Bosch Rexroth must be lifted and transported using eye bolts and a chain tackle. This motor contains parts that are susceptible to electrical discharge. The product is balanced with a half key. This device has a voltage of more than 60 V at the connecting points when its rotor is rotating. The unit should be worked on only when it is in standstill mode and after shielding its live parts. Its plug connectors must not be connected or disconnected under load. This motor should be operated by ensuring that the axial and radial forces are not exceeded. The product must be transported only by ensuring that there is no increased vibration. This device must be stored in a dry and dust-free light-protected place free of vibration and away from direct solar radiation. The unit may trigger property damage or personnel injury if it is not used as intended. It encompasses two nameplates.
This motor tends to have reduced heat dissipation resulting in thermal overload if its surface is soiled. The product is noted for its high performance and short coil heads. This device depicts high energy efficiency and lowers long-term operating costs. The unit deploys a single-turn absolute encoder for feedback. It has a fixed bearing on the non-drive end and a floating bearing on the drive end.This motor is balanced with a 3 x 3 x 14 matching key. The product-related key must be bought separately. This device is prone to encounter damage to its bearing on the non-drive end when the maximum possible axial force is exceeded. The unit must never be operated without an appropriate drive controller. It should not have fluid accumulation around the output shaft when it is mounted vertically with the output shaft facing upwards. This synchronous servomotor has a mean speed of less than 3500 min-1.
Wake Industrial Warranty
