Product Description
The MS2N03-B0BYN-CSDK0-NNANN-NN synchronous servomotor supplied by Bosch Rexroth encompasses KTY84 temperature monitoring sensors. This motor must not be lifted by using its output shaft. The product must be stored and transported only in the horizontal orientation. This device should be run at 800 rpm to 1000 rpm load after storage if the bearings are more than a year old. The unit cannot be operated for residential use. It must be used in its original state without any hardware modification. This motor incorporates a flange assembly.The product cannot be mounted with open gearboxes. This device should be protected against pinching and/or jamming of its centering collar. The unit is mounted onto the machine by using screws and washers adhering to DIN EN ISO specifications on its mounting holes. It should be worked on by skilled electricians using VDE tools after securing the machine in which it is installed against restart.
This motor uses M17 circular connectors for its power and encoder connections. The product allows rotating the output direction of its encoder connector. This device is coated with a water-based one-layer standard varnish. The unit has no additional grounding connection. Its noise emission is affected by the installation.This motor can be installed vertically with the output shaft facing upwards or downwards. The product features continuous operation with S1 operating mode. This device supports field weakening operation when it is used with IndraDrive and ctrIX drive controllers. The unit tends to get overloaded during continuous operation when it has to generate torque continuously in standstill mode. It features a controlled or uncontrolled DC bus voltage based on the drive controller used. This synchronous servomotor supports a tolerance limit of 5% for its specified data.
Wake Industrial Warranty
