MS2N03-B0BYN-CMSH0-NNNNN-GE060N2040BN-NN

Product Description

The MS2N03-B0BYN-CMSH0-NNNNN-GE060N2040BN-NN synchronous servomotor supplied by Bosch Rexroth has an output shaft on the drive end or Side A. This motor pickup or lifting must not be done by holding the output shaft. The product portrays a shaft length of 20 mm. This device encompasses a short coil head. The unit has less space requirements and requires less installation work. Its usable torque speed range can be extended over the voltage limit.

This motor encompasses a fixed bearing on Side B. The product operates with nominal data up to 40 degrees C. This device tends to get thermally overloaded because of reduced heat dissipation. The unit comprises KTY84 temperature monitoring sensors. It should be lifted using a pair of eyebolts. This motor must be stored and transported only in the horizontal orientation. The product should be commissioned only after removing any existing transport locks. This device needs a visual inspection of all its parts to be carried out after storage if the bearings are over a month old. The unit is mounted into the machine using the mounting holes. Its centering hole is used to fit the transmission elements.

This motor has a voltage rating of more than 60 V at its connecting points when the rotor is rotating because of permanent magnet excitation. The product uses rotatable hybrid M23 connectors. This device is associated with low inertia. The unit has two temperature monitoring systems that operate independently of each other. It encompasses two temperature monitoring systems that operate independently of each other. This synchronous servomotor has an output temperature based on the encoder.