MS2N03-B0BYN-CMDH0-NNNNN-NN

Product Description

The MS2N03-B0BYN-CMDH0-NNNNN-NN synchronous servomotor produced by Bosch Rexroth is an IndraDyn S motor. This motor is coated with a water-based one-layer standard varnish on its housing. The product has no special design. This device fails to run if the associated drive controller is faulty or the supply voltage is missing. The unit must be controlled and cleaned regularly to increase the availability of the system. It is equipped with a smooth and plain output shaft. This motor features intermittent operation with S3 operating mode.

The product uses a 140 x 210 x 10 aluminum plate for thermal insulation when it operates at 60 K. This device tends to get overloaded during continuous operation in applications such as press machines. The unit supports a controlled DC bus voltage when it is operated with an IndraDrive controller. Its rated data features a tolerance of +/-5%. This motor is not fitted with any holding brake. The product allows a radial force based on the distance from the shaft shoulder. This device has a very hot housing during and immediately after the operation period. The unit depends on a connected encoder for feedback. It features a non-positive shaft-hub connection.

This motor comes with the output shaft fitted onto its rotor. The product is likely to encounter a very high radial load on its bearing if extremely stiff couplings are used. This device is available without a radial shaft sealing ring. The unit encompasses protection against the ingress or penetration of dust. Its encoder has a SIL 2 safety integrity level. This synchronous motor must always be maintained in the dry state.