MS2N03-B0BYN-CMDH0-NNANN-GE060N2020AN-NN

Product Description

MS2N03-B0BYN-CMDH0-NNANN-GE060N2020AN-NN is Rexroth Bosch Group’s manufacturing that holds promising value in the automation industry. When the motor is in operation during routine conditions with no extra loads or speed, the rated torque produced by this motor is 0.68 Nm and the rated power output is 0.4 kW upon drawing a rated current of 1.39 A. However, in the idle state, the motor is still able to draw a standstill current of 2.07 A, and as a result, it delivers a standstill torque of 1.15 Nm. The best part is that for heavy-duty tasks, the motor is capable of exceeding its operational capabilities and delivering a maximum torque of 7.4 Nm after consuming a maximum current of 14.5 A and letting the rotor rotate at a maximum electrical and mechanical speed of 9000 min-1. The smooth acceleration and deceleration are also featured by this motor as it has a very minimal moment of inertia i.e. 0.000037 kgm2. The self-cooling capability of the motor removes the need for any other cooling equipment such as an axial fan or radial blower. The encoder is of multiturn type that sends advanced feedback to the control system of the motor that lets the shaft remain in its place. In addition to this, it has 5 pole pairs that play a critical role in determining the speed of the motor, torque, and efficiency characteristics. As the motor lacks the holding brakes, this is well-compensated by the presence of standard bearings. These bearings minimize the friction between moving parts, allowing components to rotate or move linearly with minimal resistance and they support both radial (perpendicular to the shaft) and axial (parallel to the shaft) loads, depending on the type.