Product Description

The MKE118D-058-NG1-KE4 synchronous servomotor by Bosch Rexroth has a housing designed in compliance with ATEX standards. This motor has a smooth shaft with a shaft sealing ring according to DIN 3760 specifications. The product must have no liquid accumulation around the output shaft with IM V3 mounting orientation. This device features a maximum limit for the allowed radial force based on the shaft breaking load and the shaft design. The unit is meant to be operated such that the permissible limits for the axial and radial forces are not exceeded. It has a brushless design. This motor is also equipped with grease lubrication for its bearing when operation takes place according to the specified conditions. The product has a favorable torque to inertia ratio that results in high dynamics. This device must be connected with only cables and parts that have been approved by the manufacturer. The unit should be used in its original state without any structural changes. It should neither be installed nor operated in the damaged or defective state. This motor can be used in metal-forming machines. The product is meant to be assembled, mounted and operated as specified in its documentation. This device cannot be used if the ambient conditions need higher explosion protection than what is mentioned on the rating plate. The unit must undergo a resurfacing of its holding brake when the storage period is less than a year. Its components tend to get damaged if a high-voltage inspection is carried out improperly. This servomotor is supposed to be handled using suitable lifting and protective equipment as well as protective clothing. The product should be stored in a sun-protected environment free of vibration and dust.