MKE118D-035-BG0-KE6

Product Description

The Bosch Rexroth’s MKE118D-035-BG0-KE6 is a three-phase synchronous servo motor with a brushed motor winding. This series of products are energized by permanent magnets and are intended for use with inverters/converters. At 750 Volts DC-bus voltage, the maximum motor speed is 3000 rpm, and the standstill torque is 48 Nm for this particular model. This device has a maximum torque rating of 187 Nm as well as a maximum current rating of 134.33 Amps. Among other things, the MKE118D-035-BG0-KE6 has a rotor moment of inertia of 0.0362 kgm² and a continuous standstill current of 29.81 Amps at 60K.

The cable entries of the MKE118D-035-BG0-KE6 are between 17.0 mm and 19.5 mm. Also, its housing design conforms with the ATEX standard. Its electrical connection terminal box is on its top side. Unlike some other variants in the Rexroth MKE series, the design of this model lacks a holding brake. The MKE118D-035-BG0-KE6 is equipped with a smooth shaft with a seal ring, and its winding is 35. Installing the MKE118D-035-BG0-KE6 at an altitude between 0 and 1000 meters is required for the optimal operation of this unit. It has an insulation class of 155, according to EN 60034-1.

The MKE118D-035-BG0-KE6, like the other models in the Rexroth Indramat MKE synchronous servo motor series, must be stored in a moisture-free, vibration-free, dust-free, and light-protected environment. Also, its motor housing, driveshaft, power connections, and encoder all meet the IP 65 rating. Its recommended operating temperature is between 0 degrees C to 40 degrees C. The MKE118D-035-BG0-KE6 generates a cutting-edge drive system using the manufacturer-specified drive units. Also, this drive system is appropriate for use in potentially hazardous locations. This unit can be shipped globally with a one-year warranty period from Wake Industrial.