MKE118D-012-BP0-KE0

Product Description

The MKE118D-012-BP0-KE0 is servo motor designed for use in hazardous location. The motor housing design complies with ATEX standard and has IP65 protection rating. It is part of MKE series from Bosch Rexroth. The frame size is 118 millimeters, the frame length code is D and the motor winding code is 012. The MKE118D-012-BP0-KE0 does not come with a holding brake. Bosch does provide holding brakes as an option for MKE motors. The function of the holding brake is to hold the axis when the motor is de-energized. Holding brakes can only be used during normal operation, in standstill and at emergency stop to deactivate a motor axis. A terminal box located on the top of the motor houses the electrical connection. An optical encoder with EnDat 2.1 interface provides motor position and speed feedback to the drive controller.

The motor shaft on the MKE118D-012-BP0-KE0 has both a keyway and a sealing ring. The shaft with keyway permits the form-fitting transmission of torques with constant direction, with low requirements for the shaft-hub connection. The shaft with sealing ring provides protection for motor bearings from dust and moisture. The sealing ring undergoes and wear and tear during motor operation and should be inspected periodically. Color of the paint on the MKE118D-012-BP0-KE0 is black. The motor paint is resistant to water, mineral oils, and diluted acids and lyes. The paint is resistant to a limited degree against hydraulic oil and organic solvents. The paint is not resistant against concentrated acids and lyes. Bosch does not allow repainting of the motor. The maximum allowed axial shock for the MKE118D-012-BP0-KE0 is 10 m/s². The maximum allowed radial shock for the MKE118D-012-BP0-KE0 is 200 m/s². This unit can be shipped globally with a one-year warranty period from Wake Industrial.