Product Description

The Bosch Rexroth MKE096B-047-PK1-KN synchronous servomotor is operated with a drive controller from the same manufacturer. This servomotor is characterized by a high level of operational reliability. The product is designed with the ability to perform electronic commutation. This unit must be handled only after reading and understanding its documentation regarding safety and intended use. It should be operated only in the provided configuration. This motor must have a proper grounding connection before it is used. The product is likely to portray faulty control because of defective components or wrong wiring or cable connection. This device does not guarantee personnel safety with its holding brake. The unit encounters radial and axial forces on its shaft and bearings during the operation phase. Its thermal coupling changes when gearboxes are mounted on the output shaft. This motor deploys the electrically released principle for the working of its holding brake. The product must be checked for the proper functioning of the brake before it is commissioned. This device should be free of salt mist and condensation on its surface all the time. The motor portrays a 2K2 climatic category according to DIN EN 60721-3-2 specifications during its transportation. This unit has a RAL 9005 black coat over its housing. Its housing is not supposed to be painted with an additional layer to make sure that there are no negative effects on the surface properties. The servomotor can be installed in an upright orientation with the shaft facing upward or downward. This product is characterized by low inertia. The device achieves a form-fitting transmission of torque with its output shaft. The unit is balanced with the complete key.