Product Description
The MKE047B-144-KG0-BUNN synchronous motor offered by Bosch Rexroth houses an aluminum flange as its insulated structure. The motor features a winding inductivity of 1.8mH. The product depicts a DS M5 frontal centering hole in accordance with DIN 332 specifications on its shaft. The speed and position of the device are controlled by the connected drive based on the current motor position. The unit is integrated with PTC resistors that offer assurance of a safe and reliable overtemperature shutdown. It comes equipped with an additional grounding connection in accordance with EN 60079-0 specifications. The housing and terminal box of the motor are fastened using screws with 8.8 minimum property class.
This product is designed such that it can be installed at a maximum elevation of 1,000m above sea level. The device housing is resistant to mineral oils, seawater, water and sewage apart from diluted lyes and acids. The capacitors of the unit feature a discharge capacity of 1.6nF. The motor shaft tends to get damaged due to intense reversing operation. The sealing ring of the shaft is subject to wear and produces frictional heat. The maximum allowed radial force depends on the design and breaking load of the shaft. The MKE047B-144-KG0-BUNN motor is dispatched through a trustworthy shipping team.
The motor bearings may experience premature failure because of increased wear or mechanical damage. The product is supposed to be transported only between -20°C and 80°C. The device should never have salt mist on its surface at the time of transport. The unit must be checked for fitting of its protective sleeves and covers during transport and storage. The device also supports an axial force of 30Nm. This product encompasses a type plate showing its designation and technical information. It must be transported only in the horizontal orientation. The motor is associated with a warranty period that is valid for one year.
Wake Industrial Warranty
