Product Description
The MKE047B-144-GP0-BUNN is a highly sophisticated industrial motor designed by Rexroth Indramat for industrial production systems. This motor is a compact device designed to resist unfavorable industrial conditions, it is also highly flexible and can be applied in a wide range of industrial conditions. The application of the MKE047B-144-GP0-BUNN industrial motor is designed specifically for industrial operation, it generates a noise pressure less than 65 decibels under normal operating conditions. An internal battery is integrated into the housing of this industrial motor, this battery helps the data memory of the motor’s encoder to retain data even when the motor has been disconnected from the drive controller which serves as its power source.
The MKE047B-144-GP0-BUNN motor is produced according to the international quality standard thus operators can be sure the motor will operate according to the technical data which has been stated in the user manual. This motor can reach a peak speed of 7000 revolutions per minute while drawing a maximum current of 22.6 Amperes from the drive controller. At standstill, the MKE047B-144-GP0-BUNN requires a continuous current of 5.0 Amperes to generate a continuous torque of 2.7 Newton meters. The maximum torque that can be generated by this motor is 11.3 Newton meters.
The MKE047B-144-GP0-BUNN servo motor weighs about 3.5 kilograms, it is designed for the B05 flange assembly and can thus be installed in any position in the industry. The heat generated by this motor is regulated via natural convection and through grease-lubricated bearings that are integrated into the motor at the motor shaft. The motor uses two major types of electrical cable; the power cable and the encoder cable. All electrical cables to be used with this motor must be properly shielded to avoid electrical interference. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
