MKE047B-144-CG1-LUNN

Product Description

The MKE047B-144-CG1-LUNN is a synchronous industrial motor designed by Rexroth Indramat specifically for potentially explosive areas and applications with high power output requirements. This industrial motor is designed by highly trained industrial technicians; it is a very durable machine that is produced according to the IP65 protection class; thus, it can operate effectively in a broad range of industrial environments. The MKE047B-144-CG1-LUNN synchronous motor can reach a maximum speed of about 7000 revolutions per minute while drawing a maximum current of 22.6 Amperes from the drive controller through its power cable. This synchronous motor occurs in two main industrial designs; The Design U is produced according to the American quality standard and the Design E, which meets the European quality standard. Operators can order for any of these industrial designs depending on the location the converter is to be operated.

The MKE047B-144-CG1-LUNN can generate a maximum torque of 11.3 Newton meters under normal operating conditions. This industrial motor draws a continuous current of 5.0 Amperes at a standstill and also generates a continuous torque of 2.7 Newton meters. The output shaft of this synchronous motor contains special grease-lubricated ball bearings, which help to reduce frictional heat during the operation of the motor. The output shaft of this synchronous motor is a plain shaft integrated with a shaft sealing ring.

The MKE047B-144-CG1-LUNN synchronous motor contains about four three pole pairs; it also has a total weight of 5.5 kilograms. The permissible ambient temperature at which this controller should be operated falls between 0 to 40 degrees, while the maximum height suitable for the installation of this motor is about 1000 meters above sea level. The motor also meets the 155 insulation class according to DIN-EN 60034-1.