Product Description
The MKE045B-144-KP1-KN is an industrial servo motor designed by highly trained engineers of Rexroth Indramat. This motor is a very sophisticated device that can be configured to meet the power requirements of several industrial machines. The application of this motor in production systems is highly rewarding as this motor can resist unfavourable environmental conditions and operate at a top level for more than five years without breaking down. This industrial motor features special grease-lubricated bearings, which are integrated into the shaft of the motor; the service life of these bearings is about 30000 hours; however, this can reduce if the motor is not operated under the permitted conditions as stated in the motor’s documentation.
The MKE045B-144-KP1-KN industrial servo motor features a motor feedback cable which it uses to exchange digital information with the servo drive, while the motor feedback cable helps to transmit electrical energy into the motor. Ready-made connection cables perfect for the operation of this industrial motor can be ordered from Rexroth Indramat. All electrical cables used with this drive controller must be properly shielded to reduce electrical interference. The MKE045B-144-KP1-KN industrial motor is designed with three pole pairs; it also contains a holding brake which helps to retain the load connected to the motor’s shaft during emergency stops. The MKE045B-144-KP1-KN industrial motor is integrated with special warning signs designed following ANSI Z535.6-2011, operators should pay close attention to these signs while operating this industrial motor.
The permissible temperature range of the operation of the MKE045B-144-KP1-KN falls between 0 to 40 degrees, while the maximum height at which this motor can be installed is 1000 meters above sea level. At 20 degrees Celsius, this motor operates with a torque constant of 0.59newton-meters per ampere and 36.3 volts per minute. This unit can be shipped globally with a one-year warranty period from Wake Industrial.