MKE037B-144-GG1-BUNN

Product Description

The MKE037B-144-GG1-BUNN Bosch Rexroth synchronous motor is designed to operate between an ambient temperature range of 0°C to 40°C. The motor is intended to be installed at a maximum altitude of 1,000m over sea level. The product comes with a RAL 9005 black coat for its housing. This paint is completely resistant against mineral oils, water, sewage and seawater, diluted acids and lyes. The device supports a maximum permitted axial shock load of 10m/s². The shaft of the unit is likely to get damaged due to intense reversing operation. Its bearings have a lifespan of 30,000 hours as per ISO 281 specifications.

The output shaft of this device might shift by 0.6mm at the flange end with respect to the motor housing because of the thermal effects. The unit is fitted with a holding brake that works on the electrically releasing principle and cannot be used for personal safety. The brake prevents the axes from falling off and retains them in standstill mode when the controller enable signal is turned OFF. There should be no salt mist on the surface of the motor at any point in time. The protective sleeves as well as covers must be fitted on the product during storage and transport.

The holding brake has to be resurfaced when the motor is stored without use for less than a year. The synchronous motor encompasses a type plate that highlights its designation as well as technical information. This type plate assists in motor identification and procuring spare parts when there is a fault. The product is to always be handled using personal protective clothing and protective equipment. The device incorporates a winding inductivity of 2.7mH. The MKE037B-144-GG1-BUNN synchronous motor is shipped through reputed freight carriers to your address with a year’s Wake Industrial warranty.