Product Description
The MKE037B-144-GG0-BENN synchronous motor from Bosch Rexroth is specially designed for use in potentially explosive areas. The motor is compatible with a single-machine design. The product renders high functionality when it is used with a drive from the manufacturer. The device is designed according to EN 60079-0/1/31 specifications. The unit belongs to the manufacturer’s MKE product group of such motors. It features permanent magnets in its rotor and supports electronic commutation. The synchronous motor features low inertia because of the choice of special materials for its magnets. This product must be used as intended and only for industrial applications.
The motor should not be modified structurally. The device can be used as a rotary main motor or a servo drive motor. The drive connected to this unit must be programmed so that the motor performs the application-specific functions. The product should not be used if the ambient conditions demand protection from explosion higher than what is specified on the rating plate. This device must be operated only if the application complies with the national EMC regulations. The components of its drive and control system must be operated, repaired and/or maintained only by qualified personnel. The MKE037B-144-GG0-BENN motor is available with a one-year warranty.
The connectors of this product should neither be plugged in nor removed when it is powered ON. The device may cause dangerous movements due to faulty control such as defective components or improper cable connections. This unit has to be protected against unintended startup by isolating the drive power connection using a safe starting lockout or OFF buttons/switches. Its drive tends to have a very hot surface during operation. The product features an insulated structure. The device depicts a continuous torque of 0.9Nm in standstill mode at 60K. The synchronous motor can be shipped internationally to any destination of your choice.
Wake Industrial Warranty
