Product Description
The MKD115C-024-KG1-AF Bosch Rexroth MKD series synchronous motor has an ideal torque to inertia mass ratio because of its high dynamics. This motor features a data memory in its encoder that makes the startup process quick and easy. The product also encompasses a low inertia mass because of the special materials featured in its permanent magnets. The device must encompass only those components, cables and other such accessories that are approved by the manufacturer. It is suitable for installation in food and paper processing machines. The ambient conditions for operating the motor should never be exceeded. The product should incorporate the manufacturer-specified safety features.
This device must never be touched throughout its operation period. This unit should be switched ON only after installing its covers and guards so that there is no contact with live parts during operation. Its drive must encompass a copper conductor with a minimum 10mm2 cross-section over the full length. The motor may indicate wrong movement due to incorrect input of parameters before its operation. The power connection to the drive of the product should be isolated using an emergency stop circuit to prevent any unplanned startup. The MKD115C-024-KG1-AF synchronous motor has a warranty tag of one year.
The motor supports a 22Nm holding brake that incorporates the electrically releasing concept. The disconnection of the product from electrical power must be done using a master switch that is secured against reconnection when it is being cleaned, maintained or repaired as well as kept unused for a long time. It should be affirmed that there is no operation of radio, remote control and/or high-frequency equipment near the supply leads of the device. The unit must be handled and mounted taking the general safety instructions and installation guidelines into consideration. The motor is shipped to the desired address through a trustworthy vendor network.
Wake Industrial Warranty
