MKD112C-024-GP3-LN

Product Description

The MKD112C-024-GP3-LN industrial AC motor is a new generation device produced by Rexroth Indramat to serve as a kinetic energy source in the industrial servo system. This motor features a compact design. The motor is only about 526 millimeters long and 192 millimeters wide; however, it can rotate at a speed of 4500min^-1 and generate a torque of about 148 newton-meters. Special grease-lubricated bearings are integrated into the motor’s shaft to reduce frictional heat and facilitate smooth rotation. The motor’s housing unit offers can effectively prevent the penetration of solid materials and jet water directed to it from any angle. However, the MKD112C-024-GP3-LN  motor can not operate underwater.

The MKD112C-024-GP3-LN motor operates with a rated current of about 21.8 Amperes and a rated voltage of 404 Volts. The connection cable used with this industrial motor must be a three-core cable with a cross-sectional area of about 0.75millimeter square. The motor also contains a holding brake which operates with a holding torque of 70-newton meters. The holding brake holds the load connected to the motor in place during emergency stops. The MKD112C-024-GP3-LN motor is covered with a prime black coat which protects the motor from alkaline and acidic liquid substances that can cause rusting.

The MKD112C-024-GP3-LN weighs about 45 kilograms. The MKD112C-024-GP3-LN a four pole pair electrical motor, this means that its electrical angles is twice its mechanical angle. The motor also belongs to the insulation class F according to DIN VDE 0530 Part 1. The winding inductance of the motor is about 1.5 millihenry. At 20 degree Celsius, the motor operates with a voltage constant of 72.7 volts per 1000min^-1, and a torque constant of 0.8 newton meters. This unit can be shipped globally with a one-year warranty period from Wake Industrial.