MKD112B-073-GG0-AN

Product Description

The Bosch Rexroth MKD112B-073-GG0-AN is a synchronous AC motor. MKD motors with winding code of 073 are designed to be used only with controllers which have a DC bus voltage of 300 Volts. Holding brake is not available on the motor. However optional holding brakes with 22 Nm or 32 Nm holding torque can be ordered separately if required. The MKD112B-073-GG0-AN supports resolver based feedback. Connector for motor power and encoder is situated on side A of the motor. Shaft on the MKD112B-073-GG0-AN is plain and includes sealing ring. As per the type code for motor, its length code is 112 which corresponds to 192 millimeters flange size and 130 millimeters centering diameter and the motor size code is B which corresponds to 28 Nm continuous torque while the motor is at standstill.

MKD series motors such as the MKD112B-073-GG0-AN are designed for use with Rexroth drive controllers. The drive and motor combination can be used for applications ranging from machine tools to the food industry and packaging machines. MKD motors offer several advantages including high reliability, high performance, high dynamics (resulting from heat dissipation from stator windings to outside wall of the motor enclosure), easy cabling and easy startup. The MKD112B-073-GG0-AN is a permanent magnet motor with electronic commutation. It is designed with low inertial mass. The MKD112B-073-GG0-AN should only be used with accessories which are approved by Bosch. Components that are not expressly named in the product documentation should not be connected or mounted. The same rule also applies to cables. The MKD112B-073-GG0-AN motor should only be operated in the configurations which are specified in the documentation and with the firmware which is specified in the documentation. This unit can be shipped globally with a one-year warranty period from Wake Industrial.