MKD112B-048-KP1-LN

Product Description

The MKD112B-048-KP1-LN Bosch Rexroth synchronous motor can be attached easily to any machine because of its flange that is in compliance with DIN 42948 specifications. The motor features an easy cabling mechanism. The product encompasses a peak torque that can be used over a broad speed range. This is possible because of the electronic commutation. The device is also noted for its high dynamics and high performance. It is characterized by low inertia mass due to the special magnet materials used to make its rotor magnets. The unit must always be handled only after reading and understanding the intended use and safety instructions.

This motor may require extra actuators and/or sensors for its controlling as well as monitoring purposes. The assembly, mounting, installation and use of the product should take place only under the specified environmental conditions. The device may depict high electrical voltage due to wrong connections. It must be operated only if the application meets the required national EMC regulations. The electrical components of the unit that have exposed live parts should be installed in a control cabinet. The vertical axes of its drives must be secured against dropping or falling after the motor power is turned OFF. The motor can be dispatched to any address irrespective of the country.

The product should be used carefully to prevent crushing and pinching. The device must not be open, disassembled or cut in the pressurized state. The handling of the unit in this state should take place only after wearing protective clothing. The holding brake of the motor has a 24VDC +/-10% voltage rating. The device features a rated current of 6.9A and a rated power of 2.7kW at 60K with a natural convection method of cooling. The unit encompasses an ambient temperature range of 0°C to 40°C. The MKD112B-048-KP1-LN motor features one-year warranty support.