Product Description
The MKD112B-024-GP2-AN Bosch Rexroth synchronous motor must be used only as intended to avoid property damage and bodily injury. The motor should be installed as well as operated as per the specified ambient conditions. The device is a good option for deployment in automation and handling systems. It must be ensured that the digital unit does not function under water. The unit features an IP 65 level of protection. The rotor features a 192 x 10-4 moment of inertia. The product is intended to be operated at an ambient temperature ranging from 0°C to 40°C. The device encompasses a thermal time constant of 40 minutes when it is cooled by natural convection.
The motor must never be operated without a permanent connection of the ground wire. The unit should be operated and serviced only by trained and authorized personnel. It is fitted with an electrically releasing holding brake. The product may show signs of dangerous movements if there are software errors or malfunctioning sensors or encoders. The handling of this device must be carried out using appropriate mounting and transport equipment. The unit should not be opened or disassembled in a pressurized state. The motor is equipped with a flange of 192mm size and 130mm centering diameter.
The product must be set up at a height of 1,000m above sea level. The device should not be put to usage for applications that are subject to shock loads if fitted with a blower. It features a relative air humidity ranging between 20% and 30%. The unit incorporates a RAL 9005 prime black coat. The shaft may get damaged due to intense reversing operation. Its sealing ring is a rubber seal that generates frictional heat and is prone to wear and tear. The sealing point of the ring must always be clean and lubricated. The AC motor is available for international shipping with a one-year warranty.
Wake Industrial Warranty
