Product Description
MKD071B-061-KP0-KN is a servo motor. It is a product of Bosch Rexroth. The motor is designed for industrial applications. Typical MKD motor applications include machine tools, handling and automation, and printing and paper industries. The motor supports features optimized for industrial applications. These include resolver feedback with integrated multiturn encoder for absolute position detection. The motor gets power from a motor controller that also controls motor speed and position. Real time feedback enables accurate motor position and feedback control. The main shaft on the MKD071B-061-KP0-KN motor includes a key and a shaft seal. The main shaft complies with DIN 6885-1. The motor supports both convection cooling and surface cooling. Convection cooling is adequate for applications with lower load requirements. Surface cooling is adequate for applications with higher load requirements.
However, surface cooling is more capital intensive, as it requires installed of a cooling fan or blower on the motor housing. The output torque and current of the MKD071B-061-KP0-KN motor is higher with surface cooling. Bosch recommends 0 to 40 degrees Celsius ambient temperature for MKD motors. Higher temperatures cause the output to derate. The maximum permitted temperature with derated output is 55 degrees Celsius. Bosch recommends 0 to 1000 meters setup height. Higher altitudes cause output derating. The maximum permitted altitude with derated output is 3000 meters. Weight of the motor is 8.8 kilograms. The IP65 rated housing provides robust ingress protection. The motor has a 115 millimeter flange for secure mounting. Each of the four mounting holes on the flange has a 9 millimeter diameter. Length of the servo motor is 274 millimeters. Diameter of the main shaft is 19 millimeters.