Product Description

MKD071B-061-GP0-KN is a servo motor. It is manufactured by Bosch Rexroth. The motor supports resolver feedback. It is deployed in combination with a motor controller. The controller supplies motor power via a dedicated power cable. The controller receives feedback from the motor and adjusts its output to ensure motor speed and position match programmed values. MKD motors have either plain shafts or shafts with a key. The shaft on the MKD071B-061-GP0-KN motor has a key and complies with DIN 6885-1 requirements. A shaft seal is installed on the motor for ingress protection. MKD motors have IP65 rated housings for robust ingress protection. These housings are completely dustproof and are also safe from water directed at them from low-pressure water jets. MKD motors deliver rated output when the ambient temperature is between 0 and 40 degrees Celsius.

In addition, these motors require maximum setup height of 1000 meters. Bosch permits derated operation at ambient temperatures of up to 55 degrees Celsius and site elevations of up to 3000 meters. MKD motors support an optional holding brake. However, a brake is not installed on the MKD071B-061-GP0-KN motor. This motor supports convection cooling and surface cooling. Both methods provide effective heat dissipation. However surface cooling is preferred for high load applications as it enables higher output torque and current. The motor comes with an attached type label. This type label is attached to the housing. An additional type label is stuck to the original type label on the motor housing with double-sided adhesive tape. If the original type label on the motor gets concealed by the machine, the second label can be put so that it is visible.