MKD071B-061-GG3-KN

Product Description

The MKD071B-061-GG3-KN synchronous motor manufactured by Bosch Rexroth is used in conjunction with the manufacturer’s digital drive controller. The motor renders maintenance-free operation because of its brushless design as well as grease-lubricated bearings that last the lifetime of the motor. This product features an IP 65 degree of protection if the encoder and power cables are mounted properly. The rotor of the device has an inertia of 8.7 x 10-⁴ kgm². The unit is characterized by high dynamics due to a favorable torque to inertia mass ratio. It supports the fitting of attachments easily because of its flange design. The motor is apt for use in automation and handling systems.

The synchronous motor must not be used when its surroundings have extreme temperature variations. The device may cause electric shock, material damage, or injury if it has been tampered with. It should not be used in elevators for people, construction cranes, or refinery plants. The unit must be started only if the machinery in which it is installed adheres to the application-specific safety standards and specifications as well as national regulations. The product features a leakage current of more than 3.5mA during normal operation. The housing is prone to high voltage if the ground wire is not connected before startup.

The motor may show signs of dangerous movement if its sensors and encoders malfunction. It should be integrated with high-level monitoring devices for personal safety. The mounting of the emergency stop switch of the product must be done in such a way that is easily accessible by the operator. This unit comes with a maximum speed of 6,000min^-1. The device supports a maximum setup height of 1,000m above sea level. The winding resistance of the motor is 1.45 Ohms at 20°C. It should be handled only using the appropriate tools. This digital motor can be sent to you with a warranty for a year through our reliable delivery network.