Product Description
MKD041B-144-KP0-KN is a Bosch Rexroth servo motor. It is manufactured for applications such as machine tools, automation, handling and packaging machines. The motor has an IP65 rated housing and provides high operational reliability. Integrated temperature monitoring enables overload protection. The favorable ration of torque to inertia mass enables high dynamic. Heat dissipation from the stator windings enables high overload capacity. The motor supports continuous start-stop operation because of electronic commutation. The DIN 42948 compliant flange allows easy attachment to machines. Operators can install the motor in any desired position. Cable sets are available in various designs and operators can easily perform motor cabling. Data memory in the encoder enables simple and quick startup. The MKD041B-144-KP0-KN motor has a resolver>. for feedback and an additional multiturn encoder.
It has a shaft with key as per DIN 6885-1 and a sealing ring on the shaft. Diameter of the motor shaft is 13 millimeters the approximately 30 millimeters of the shaft are outside the main housing. Length of the motor is 243 millimeters and the motor weight is 4.4 kilograms. Motor performance is dependent on operation conditions. The optimal temperature for motor operation is <<0 to 40 degrees Celsius. Bosch recommends 0 to 1000 meters site elevation. Continuous torque at standstill of the motor is 2.7 Nm and the continuous current is 7.5 Amps. Rated speed of the motor is 3000 RPM and the maximum speed is 7500 RPM. A black prime coat is applied on top of the IP65 rated motor housing. Only trained personnel should handle and operate the motor. Failure to follow recommended operating and safety instructions can lead to equipment failure and injury.