MKD041B-058-GG0-KN

Product Description

The MKD041B-058-GG0-KN is a synchronous permanent magnet motor that belongs to the MKD series of motors. These motors are produced by the company Indramat, which specializes in automation equipment. To make a cheap automation system, this motor can be paired with drive controllers, produced by Indramat, to make a Diax04 or Ecodrive unit.

The length of the MKD041B-058-GG0-KN is 2.7nm while its flange size is 82mm. The centering diameter is 50mm. The winding code for this motor is 058. This device has a shaft sealing ring but no keyway. The motor also possesses resolver feedback but this only single-turn, so it cannot provide data for more than one revolution at a time. This motor comes with many features but it does not have a holding or blocking brake.

One of the reasons to consider the MKD041B-058-GG0-KN over other similar products is durability and reliability. These motors rarely have any fault, but if there is an issue diagnosing the problem is easy due to the error code system. Provided that they are used according to instruction and are maintained sufficiently, these motors can last for several decades. The Indramat MKD041B-058-GG0-KN has a maximum speed of 7000 RPM. However, the rated speed of the motor is 5000 RPM. Additionally, the device runs on a rated frequency of 250Hz and a rated voltage of 386V. The continuous current of the device, while at standstill, is 3.4A and the peak current is 15.3A. The mass of this motor is 4.4 kilograms while its protection category is IP65.