MHP112A-058-HG0-ANNNNN

Product Description

The MHP112A-058-HG0-ANNNNN digital AC motor can be operated under adverse environmental conditions because of its completely sealed motor design. The Bosch Rexroth motor features high power data and high dynamics owing to its favorable torque-to-inertia mass ratio. The product supports easy mounting to a machine with its flange that complies with DIN 42948 specifications. The device also encompasses a peak torque that can be utilized over a wide speed range. It can be installed in textile, packaging, printing, and handling machines. The unit should be operated only after reading all safety instructions that come with the product. The motor may produce a high electrical shock if it is tampered with.

The synchronous motor comes with a power connector on the A side. The product may produce high electrical voltage due to incorrect connections. The device features a torque constant of 1.44Nm/A, a voltage constant of 89V/1,000min-1, and a windings resistance of 0.86 Ohms at 20°C. It should be allowed to operate only if the application meets the related national EMC regulations. The unit must not be operated in refineries, radioactive, nuclear, or high-frequency applications. The electrical connection points of the product should not be touched when the power is turned ON. This device should encompass a copper conductor that has a cross-section of at least 10mm² throughout its course for the protective connection.

The digital motor should be checked for wrong or unclean wiring of cable connections before use to prevent dangerous movements. The prime coat of the product features resistance against weathering, chalking, and yellowing. The device should not be assembled, cut, or opened in a pressurized state. It should take load factors into account if the installation elevation limit and ambient temperature are exceeded. The synchronous motor can be sent to your address through shipping partners such as DHL and FedEx with a one-year warranty.