Product Description
The Bosch Rexroth MHD115C-024-PG1-AN synchronous motor should be used only with the manufacturer’s drive controller. This motor has a 70Nm holding brake that works on the electrically releasing principle. The product must be free of excessive shavings, dust or dirt as this can affect the functioning of the motor adversely. The unit features bearings with a nominal lifespan of 30,000 operating hours as per ISO 281 specifications if the allowed axial and radial forces are not exceeded. Its protective conductor connection must be checked for tight seating at regular intervals. The motor renders maintenance-free operation. This is because of the brushless design and grease-lubricated bearings for the entire service life.
The motor uses special magnet materials for its permanent magnets. These magnets feature electronic commutation property. The product should be put to use only as intended to avoid property damage and/or personnel injury. The device installation, operation and service have to be done only as per the specified environmental conditions and regulations. The unit is used in automation and handling systems. It must never be used underwater. The AC motor installation and/or starting must be done only after reading its documentation. The drive controller used with the device is meant to be installed only in industrial machinery.
The synchronous motor should not be operated without a grounding connection. The motor has a 214A peak current rating. The product is associated with a length code of C. The device handling and mounting must be done taking the general installation guidelines and safety instructions into consideration. The unit has four pole pairs. It features an ambient operating temperature of 0°C to 40°C. The flange fixed to the motor has a centering diameter of 182mm. This motor with a year’s Wake Industrial warranty is shipped to the specified address across the world through reputed freight carriers.
Wake Industrial Warranty
