Product Description
The Bosch MHD115B-058-PP1-AN is an industrial servo motor. It has a IP65 rated housing. The motor housing is completely sealed. In addition, the cable connectors are also sealed and the shaft also includes a seal. This allows use of the motor in adverse environmental conditions. The ambient temperature range recommended for motor operation is 0 to 40 degrees Celsius. The recommended range of altitudes for motor operation is 0 to 1000 meters above mean sea level. The motor housing is suited to natural convection and liquid cooling. The choice of cooling method depends on motor load: natural convection is suitable for low motor loads and liquid cooling is suitable for high motor loads. Some motors from the MHD115 series also support surface cooling. Characteristic speed of the motor for all operating conditions is 4000 RPM.
Rated speed of the motor with liquid cooling is 4000 RPM. Other technical data for the MHD115B-058-PP1-AN motor with liquid cooling include 56.4 Nm rated torque, 49.6 Amps rated current and 28.6 kilowatts nominal output. The rated speed of the MHD115B-058-PP1-AN with natural convection is 1500 RPM. Motor technical data at 60K overtemperature with natural convection include 17 Nm rated torque, 15 Amps rated current and 3.2 kilowatts nominal output. Motor technical data at 100K overtemperature with natural convection include 33.8 Nm rated torque, 30 Amps rated current and 6.6 kilowatts nominal output. In addition to a seal the shaft on the MHD115B-058-PP1-AN features a key. Other motor features include a 70 Nm holding brake and an integrated encoder. Power connector on the motor is on side A. Approximate shipping weight of the MHD115B-058-PP1-AN is 40 kilograms. Weight of the holding brake is approximately 3.8 kilograms.
Wake Industrial Warranty
