MHD112C-058-PG0-AN

Product Description

The Bosch MHD112C-058-PG0-AN is a Rexroth MHD series synchronous motor. The MHD product line is designed for numerous applications including machine tools, handling and automation. The MHD112C-058-PG0-AN is a permanent magnet motor and has electronic commutation. The motor has frame size of 112, flame length of C and has a low inertia mass. The code for the motor winding is 058. The motor does not feature integrated holding brake. Bosch does offer holding brakes which are rated for 22 Nm, 32 Nm and 70 Nm and these can be ordered depending upon requirements. Characteristic motor speed of the MHD112C-058-PG0-AN is 4000 RPM and the maximum motor torque is 148 Nm. The motor peak current is 239 Amps and the number of pole pairs are four. The motor is cooled through natural convection.

Bosch recommends the 0 degrees Celsius and 40 degrees Celsius as the lower and upper ambient temperature thresholds for the MHD112C-058-PG0-AN. When the motor is not being used or is being transported, the ambient temperature should be between -20 and 80 degrees Celsius. Maximum setup height for the motor is 3300 feet. If the operational thresholds specified by Bosch are exceeded, then the motor performance will deviate from the manufacturer specifications. The motor supports digital servo feedback and Bosch has provided an integrated absolute encoder on the motor. The motor has a plain shaft with shaft sealing ring. The electrical connector is located on side A of the motor. Weight of the motor is 45 kilograms. Provided that the power and encoder cables are properly mounted, the motor has protection rating of IP65. The MHD112C-058-PG0-AN can be shipped to any address globally with a one-year warranty period from Wake Industrial.