Product Description
The MHD095C-058-PP1-RN synchronous motor manufactured by Bosch Rexroth renders maintenance-free operation. This motor has a completely closed design. The product features IP 65 degrees of protection. The device has a C length code. The unit should be used only as intended by the manufacturer. Its magnets are designed using special materials that allow the motor to have low inertia mass. The unit has to be installed, operated and serviced only as per the specified environmental conditions and regulations. The motor is suitable for use in automation and handling systems. The product must be used only by trained and qualified personnel.
The device is associated with a flange size of 140mm or 150mm. It has a winding inductivity of 2.6mH. The unit comprises a keyway shaft with an end-sided centering hole and DS thread as per DIN 332, Part 2 specifications. The motor must be connected to a drive controller offered by the manufacturer. This product should not be used if the operating conditions do not comply with the specified environmental conditions. The device encompasses a plastic protective sleeve on the shaft that must be removed only after the motor mounting is done. It is possible to dispatch the motor to any destination of your choice across the globe.
The product has a peak current rating of 117A. Its keyway shaft allows keyed torque transmission with low requirements for shaft-hub connection and constant direction. This device features an electrical connection directed to the right side. The unit incorporates a radial shaft sealing ring that functions like a rubbing seal that generates frictional heat and is subject to wear. This ring is made of materials that are resistant to chemicals and oils. The product utilizes a 22Nm holding brake that works on the electrically releasing principle. Its shaft and bearings are subject to various forces when it is in use. The motor is available with a one-year warranty tag.
Wake Industrial Warranty
