MHD095C-024-NG0-AN

Product Description

The Bosch MHD095C-024-NG0-AN is a MDD series digital servo motor. It has an enclosure housing that is IP65 rated. This excellent protection rating ensures that the drive is safe from dust and from low-pressure liquid jets. This rating also allows use of the motor outside control cabinets and very near to the operating machinery. As a result the installation and operating costs are reduced and troubleshooting is also made easier. The motor gets its power from a drive controller. The power cable from the controller connects to an electrical connection that is situated on side A of the housing. The motor supports servo feedback. The feedback from the motor reaches the drive controller via as separate feedback cable. A holding brake is not available but can be ordered if required.

The main shaft on the MHD095C-024-NG0-AN is plain and includes a sealing ring. The seal protects motor bearings against water and dust ingress. The seal does however wear out during use and needs periodic replacement. The motor housing is suited too cooling via two methods that are natural convection and surface cooling. The characteristic speed of the MHD095C-024-NG0-AN motor is 2000 RPM and the rated speed for all operating conditions is also 2000 RPM. The continuous torque and current ratings with natural convection are 21 Nm and 14.3 Amps. The continuous torque and current ratings with surface cooling are 31.5 Nm and 21.5 Amps. The peak current output of the MHD095C-024-NG0-AN is 64.4 Amps. The number of pole pairs on the MHD095C-024-NG0-AN motor are four. The motor mounts via four holes that are provided on the 140 millimeter motor flange. The centering diameter of the MHD095C-024-NG0-AN motor is 130 millimeters.