MHD095B-035-NP0-BN

Product Description

The Bosch Rexroth MHD095B-035-NP0-BN is a MHD series servo motor. Bosch has designed the motor for flange mounting. The size of the motor flange is 140 millimeters and it includes four holes with 11-millimeters diameter. The length of the MHD095B-035-NP0-BN motor is 356 millimeters and the centering diameter is 130 millimeters. The output direction for the power connector has to be selected at the time of ordering. On the MHD095B-035-NP0-BN, the power connector is located on side B. The motor is available without a holding brake. A 22 Nm holding brake can however be ordered if required. The shaft on the MHD095B-035-NP0-BN includes a key (as per DIN 6885-1) and a sealing ring. The shaft seal protects motor bearing from dust and moisture and extends the service life of the motor. Bosch recommends periodic inspection of the shaft seal and its replacement when required.

The MHD095B-035-NP0-BN servo motor supports digital servo feedback. The motor housing is IP65 rated: this means that the motor is completely safe from dust and from low-pressure water jets. The shaft seal is one of the factors that contributes to this excellent protection rating. The other factor that contributes to this protection rating is the completely sealed motor housing. The IP65 rating of the MHD095B-035-NP0-BN allows motor installation very near the operating machines which reduces installation cost and total cost of ownership. The motor housing is suited to surface cooling and natural convection. Surface cooling may be used for applications that involve motor operation at high loads. The rated speed of the MHD095B-035-NP0-BN motor is 3000 RPM and the maximum speed is 4000 RPM. the approximate motor weight is 19 kilograms.