MHD093C-058-PP0-AN

Product Description

Bosch manufactures and sells industrial automation components on a global scale. The company sells a variety of products, including drive controllers, servo motors, and power supply modules.

The MHD093C-058-PP0-AN model is one of Indramat's top-tier synchronous motors. Because of its electrical commutation, this model provides consistent start-stop processes with high repeat frequencies. The MHD093 synchronous motor has four polar pairs and uses convective heat transfer to regulate the motor's temperature. For surface cooling under specific operating conditions, a radial/axial blower unit is also inserted in the synchronous motor. The motors can only be exploited with the accessories listed in the manual. Components that are not explicitly named are not permitted to be installed or attached. The same applies to cables and lines. To identify the absolute position of the keyways output shaft, the model involves a DSF integrated multiturn absolute encoder. At the top, a power connector with an A-side output direction is placed, and the motor has no holding brakes. The MHD093 synchronous motor is intended to perform efficiently in temperatures ranging from 0 to +40 degree Celsius and the permissible transportation and storage temperature of the motor ranges from   -20 to 80 degree Celsius.

The model MHD093C-058-PP0-AN is designed to perform at a maximum speed of 6000 rpm and a rated speed of 2000 rpm, distributing a maximum torque of 88 Nm and a rated torque of 7.9 Nm with a thermal time constant ranging from 35 to 75 minutes depending on the type of cooling process occurs during working. Any connected drive controller should be programmed prior to startup to verify that the motor operates in particular to the application. Wake Industrial will deliver this product (MHD093C-058-PP0-AN) to your desired address along with a MHD user manual.