Product Description
The MHD093C-035-PP1-BA synchronous motor manufactured by Bosch Rexroth has a power connection and an encoder connection. These connectors are provided as separate plug connections. The product is supplied with power through either a bayonet catch or a flange socket with a screwed connection. The device uses a three-core cable with a minimum of 0.75mm2 cross-section as its connection cable for the electrical connection. The unit supports a maximum installation elevation of 1,000m above sea level. It must be ensured that utilization factors are taken into consideration when this elevation is increased. This product is designed to carry loads only if it is shock-decoupled or attached to shock absorbers.
This device comes with an IP 65 degree of protection for its housing, output shaft and power as well as feedback connectors. The unit incorporates a keyway shaft along with a shaft sealing ring. The motor shaft is designed as per DIN 6885-1 specifications. It should be ascertained that the shock load limits of the motor during operation, storage and transit are never exceeded. The product supports the fitting of sealing air connectors by replacing the flange socket cover. The O rings must be properly seated when this replacement is done. This MHD093C-035-PP1-BA motor is available with a one-year backup warranty for worldwide shipping.
The motor portrays a B05 design and can be installed both horizontally and vertically. It must be made sure that there is no fluid accumulation at the output shaft for a long time when the product is installed vertically with the shaft upward. This fluid accumulation can result in its penetration into the device and result in its damage. The synchronous motor features a prime black RAL 9005 varnish coat on its housing. The varnish must not have a thickness of more than 40µm. This product can be fitted with blowers when it operates with extreme loads such as continuous start-stop operation with high frequencies.
Wake Industrial Warranty
