Product Description
The MHD093C-035-PP1-AN synchronous motor is a good choice for cost-effective automation systems when it is used along with the manufacturer’s drive controllers. The motor can be started quickly and easily because of the data memory present in the motor encoder. It supports continuous start-stop operation due to high repeat frequencies. The device has high overload capability because of the favorable heat dissipation between the exterior wall of the housing of the motor and the windings of the stator. The motor must not be operated when there is extreme maximum temperature or extreme temperature variations. The product comes with a one-year warranty.
The motor comes with a 22Nm holding brake. The device may cause bodily harm such as mechanical shock, crushing, cutting and shearing if it is incorrectly handled in the pressurized state. The motor housing should be permanently grounded to the safety connector before it is switched on. Wrong input parameters for the motor or a malfunctioning sensor or encoder can cause dangerous movements. The device must not be operated near radio, remote-control and high-frequency equipment. The flange has a size of 140mm or 150mm. The unit also has a centering diameter of 130mm. It also features a continuous torque of 23Nm and a continuous current of 18.5A in standstill mode at 60K and natural convection cooling mode is used.
The synchronous motor is integrated with an encoder system for generating motor feedback. The motor has a winding inductivity of 3.2mH and a winding resistance of 0.79 Ohms at 20°C. The unit also has a torque constant of 1.39Nm/A and a voltage constant of 126.4V/1,000min-1 at 20°C. Its keyway shaft is designed according to DIN 6885-1 specifications. The multiturn absolute encoder performs the measurements optically and has a system accuracy of +/-0.5 angular minutes. The MHD093C-035-PP1-AN motor can be shipped to any part of the world.
Wake Industrial Warranty
