Product Description
The MHD093B-058-NG0-AN synchronous motor must be kept free of excessive shavings, dust, or dirt to avoid adverse functioning or motor failure, in extreme cases. The cooling ribs should be cleaned periodically for maintaining the large heat radiation surface. The service life of the bearings is affected adversely even with a slight increase of the axial and radial loads from their maximum values. They must be replaced if there is a running noise or if their nominal service life has been reached. The connection lines should also be inspected for damage on a regular basis. The motor has a torque constant of 1.5Nm/A at 20°C. The unit features high dynamics due to a favorable torque-to-inertia mass ratio.
The motor supports the mounting of belt pulleys and pinions directly over it. The product also allows the easy attachment of any device as it has a flange that complies with DIN 42948 specifications. It features a voltage constant of 136V/1,000min-1 at20°C. The synchronous motor is capable of withstanding high overloads because of the favorable heat dissipation to the exterior wall of the housing from the windings of the stator. The device must not be modified structurally from its original state. The product may require additional actuators and sensors for its monitoring and controlling.
The motor should not be placed underwater or switched ON when the temperature variation is very high. The device should be operated only by personnel who are qualified and trained for the same. It has a winding resistance of 1.26 Ohms at 20°C. The motor cable has a minimum strand cross-section of 1.5mm2. The synchronous motor must not be used even for a brief period if there is no permanent connection of the ground wire to the points provided for the same. The MHD093B-058-NG0-AN can be dispatched safely to your preferred address with a one-year warranty.
Wake Industrial Warranty
