MHD093B-035-PG1-LN

Product Description

The MHD093B-035-PG1-LN synchronous motor offered by Bosch Rexroth must be started only after ensuring that the electrical connections have been established as specified. The cable screw unions of the product should also be tightened properly. The performance of the device may get affected due to excessive dirt, dust or shavings. The unit is fitted with bearings that have a service life of 30,000 operating hours as per DIN ISO 281 specifications. Its connection lines have to be checked for damage at regular intervals and replaced if needed. The holding brake in this product is to be checked for proper functioning before the motor is installed.

This device has a rated frequency of 167Hz. The unit has four pole pairs. Its rotor has a 25.5 x 10^-4kgm² moment of inertia. The product is operated primarily in printing, paper and food industries as well as packaging machines. The motor can function under adverse environmental conditions because of its completely closed design. The device supports start-stop operation continuously with high repeat frequencies. The unit depicts high dynamics, high-performance data and high overload capability. It features protection against overload due to its inbuilt temperature monitoring functionality.

The product portrays a simple and quick startup because of the data memory in its encoder. The device features an easy cabling mechanism. It is possible to mount belt pulleys and pinions directly over the motor. The unit is never meant to be used in a damaged or defective state. This motor features a storage and transport temperature range of -20°C to 80°C. The product has a 1.5Nm/A torque constant, 1.26 Ohms winding resistance and 136V/1000min^-1 voltage constant at 20°C. The device supports a minimum strand cross-section of 1.5mm². The unit is not meant to be used for applications that are not specified by the manufacturer. This synchronous motor comes with warranty backup for one year and can be sent all over the world.