Product Description
The MHD093A-058-PG1-AN motor is an MHD series synchronous motor from Bosch Rexroth. This motor is widely used in the implementation of automation systems. The product has a size of 093 and a length of A. It features maintenance-free operation and high operational reliability. The device offers protection against overload due to its temperature monitoring capability. The unit features permanent magnets made of materials that result in low inertia mass of the motor. The motor must not be installed or operated if it is either defective or damaged. The AC device can be used both as the main drive motor as well as a servomotor.
This product must be installed and started only after reading the related documentation. It should be used only with those accessories that are approved by the manufacturer. The drive controller used with the device must be programmed before starting so that the device performs the application-specific function. The synchronous motor may cause an electric shock if it is used incorrectly. The ground wire should be permanently connected before the power is switched ON.
The synchronous motor features a winding code of 058. The motor may experience dangerous movement if the connected monitoring devices, encoders, and sensors malfunction or due to faulty control. The housing surface tends to become extremely hot during operation. It must be allowed to cool for at least 10 minutes after switching it OFF and handling it. The device encompasses four pole pairs. The unit has a continuous torque of 12Nm and a continuous current of 12.8A when it is in standstill mode. The motor is equipped with a multiturn absolute encoder and a keyway shaft with a shaft sealing ring. The MHD093A-058-PG1-AN motor can be sent to the address of your preference globally with a one-year warranty.
Wake Industrial Warranty
