Product Description
The MHD093A-035-PG2-AA synchronous motor from Bosch Rexroth is used with the manufacturer’s drive controllers to function as a cost-effective automation system. This motor must be handled taking the general safety instructions into consideration, to avoid material damage and personnel hazards. The device is intended to be operated only within the specified ambient conditions. The unit must not be directly operated on a three-phase network. Its electric installation should be in compliance with the EMC Directive 2004/108/EC protection requirements. The motor belongs to the MHD product group of such synchronous motors. The product is ideal for use in machine tools.
The motor features high operational reliability. The device is capable of rendering maintenance-free operation. The unit comes equipped with a 32Nm holding brake. This holding brake is activated and/or controlled by the drive controller and does not offer assurance of personnel safety. This synchronous motor must never be handled by people with metallic implants or pacemakers. It has a characteristic motor speed of 3,000min-1. The product features a very hot motor surface during operation. The device must be cooled down completely before touching it to avoid burns. This MHD093A-035-PG2-AA motor is backed by a one-year warranty period.
This product is equipped with temperature sensors on its windings. These sensors tend to get damaged due to improper use. The unit comes along with operating and safety instructions, a secondary rating plate as well as protective covers for the plug connectors and output shaft. It uses a flange socket for its power and encoder electrical connection. The holding brake works on the electrically releasing principle. The motor can be installed perpendicular or parallel to a flat surface. The product showcases a DS M10 centering hole in adherence to DIN 332 specifications on the output shaft. The synchronous motor is shipped in custom military-grade packaging to avoid damage during transit.