MHD093A-035-NG1-LA

Product Description

The MHD093A-035-NG1-LA is a Bosch MHD series synchronous motor. The motor frame size is 093. The motor centering diameter is 130 millimeters. The motor flange size is 150 / 140 millimeters. The diameter of the plain motor shaft is 32 millimeters. The width of the motor is 140 millimeters. The length of the MHD093A-035-NG1-LA motor is 316 millimeters. Weight of the servo motor is 14.1 kilograms. The housing of the motor is painted black. Protection category of the motor housing is IP65. The insulation class of the motor is F as per DIN VDE 0530 part 1. The cooling mechanism for which the motor housing is designed is natural convection or surface cooling. The MHD093A-035-NG1-LA motor will operate as per manufacturer-specified nominal values as long as the ambient conditions comply with those that are recommended by Bosch.

These ambient conditions include 0 to 40 degrees Celsius ambient temperature and site altitudes of up to 1000 meters. Operation of the motor outside these recommended conditions leads to output derating and could cause the motor to malfunction. Bosch will not accept any liability for motor operation outside recommended ambient conditions. Bosch will also not accept any liability if the motor is not used as intended. The motor warranty will also not be valid if it is not used as intended. Personnel dealing with the motor should read and implement safety instructions listed in the product documentation. Damaged or defective products should not be put into operation. The MHD093A-035-NG1-LA motor supports digital servo feedback. Other motor features include a 22 Nm holding brake, plain shaft with seal and a power connector on the left side of the motor.