MHD093A-035-NG1-AA

Product Description

The Bosch Rexroth MHD093A-035-NG1-AA is a MHD series servo motor. The integrated features supported by the motor include digital servo feedback, holding brake and a plain shaft with sealing ring. The seal on the motor shaft is designed to prevent oil leakage and to protect the motor bearings from dust and moisture. The seal should be inspected periodically as in undergoes wear during motor operation. Periodic replacement of the shaft seal may be required. The housing of the MHD093A-035-NG1-AA is designed for natural convection or surface cooling. Therefore suitable clearances should be provided around the installed motor so that air can flow without being obstructed. The recommended ambient temperature for motor operation is 0 to 40 degrees Celsius. The motor performs as per manufacturer specifications only when the ambient conditions are in line with manufacturer recommendations.

If the MHD093A-035-NG1-AA motor is operated outside manufacturer recommended ambient conditions, then the motor output will derate and the motor could also suffer damage. Bosch recommends operation MHD093A-035-NG1-AA motors at altitudes of up to 1000 meters. During storage the motor should be kept in an environment where the temperature is between -20 and 80 degrees Celsius. The rated holding torque of the holding brake is 22 Nm. Length of the MHD093A-035-NG1-AA motor is 316 millimeters. The width of the motor is 140 millimeters. The diameter of the motor shaft is 32 millimeters. The approximate weight of the motor is 14.5 kilograms. The power connector is located on side A of the MHD093A-035-NG1-AA motor. Only trained and qualified technical personnel with experience of working with high power electrical devices should install, operate and maintain the MHD093A-035-NG1-AA motor and associated devices.