Product Description
The MHD093A-035-NG0-AA servo motor is a highly reliable synchronous motor designed by the Rexroth Indramat to provide high-frequency movement for industrial machines, requiring precise and accurate movement. It has a housing designed according to the IP65 protection class as specified by DIN EN 60529; thus, it is completely safe from the ingression of dust and low-pressure water projection. The motor is finished with a black varnish to prevent corrosion of the body frame in contact with a dilute concentration of acid and harmful chemicals.
The MHD093A-035-NG0-AA is a modified model which requires a continuous current at a standstill of 100 kelvin 11.4 amperes to generate a continuous torque at standstill 100 Kelvin 18.0 newton-meter. It makes use of permanent-magnet with electronic commutation. The electronic commutators produce a continuous start-stop operation, with high frequency and a velocity of 2000 radii-per-minute. It has a plain cylindrical output shaft with a shaft sealing ring, which permits the smooth running of the motor. The motor is rated at 348 volts and 7.0 Amperes of current. It is totally maintenance-free because its bearings are grease-lubricated for a lifetime, which prevents the sealing point from becoming dry and dirty, makes sure everything is clean, prevents premature failure of the bearings due to increased wear or mechanical damage.
The MHD093A-035-NG0-AA motor offers ease of use with flexible installation requirements at any altitude between up to 1000 meters above sea level to any desired installation position. It generates a motor speed of 2000 radii per minute for its operation on a diverse range of industrial machine tools. Its winding temperature of 115 degrees Celsius should not be exceeded to prevent the shortening of motor life by half per 10 degrees Celsius increase.
Wake Industrial Warranty
