MDD115D-N-020-N2M-130PB0

Product Description

The MDD115D-N-020-N2M-130PB0 digital AC servomotor from Bosch Rexroth has a power cable and a connecting cable for the temperature sensor in its power connection. This motor supports either straight or angle feedback connectors. The product should be reseated before use after a storage period of more than two years. This device does not feature the inclusion of a blocking brake. The unit is compatible with an axial blower or a radial blower. Its output shaft is affected by radial and axial forces when it is subject to a load.

This motor encounters damage to the bearing on Side B because of thermal stress. The product needs a blower connection for continuous start-stop operations with high repetitive frequency. This device is meant to be handled only by people with the expertise to do so. The unit needs a disconnection of the drive controller after 60 seconds of running without load during the reseating process. Its angle feedback connector is oriented to Side B by default. This motor incorporates the blower connection in its electrical connection along with the feedback and power connections. The product is protected against overheating by a temperature sensor. This device depends on an encoder for the speed and position evaluation. The unit features 15 minutes maximum duty cycle time. Its encoder deploys an optical system as its measuring principle.

This motor has a black prime coat on its housing. The product is balanced with a complete key. This device must be grounded to the servo amplifier before it is commissioned. The unit has a hot surface during and immediately after its use. Its output shaft and blower must not be used for the pickup action. This digital AC servomotor cannot be operated without a compatible drive controller.