Product Description
The MDD115D-N-020-N2L-130GA0 digital AC servomotor by Bosch Rexroth functions in unison with a digital drive controller from the same manufacturer. This motor has a high-power density. The product has low inertia because of the materials used to make the permanent magnets. This device uses a plain shaft that supports non-positive type shaft-hub connections. The unit features protection against the penetration of water. It is necessary to consider utilization factors when the operation takes place outside the ideal limits. The motor must not have fluid accumulation around the shaft when it is installed with the shaft towards the top.
The product encounters thermal stress when drive pinions with helical teeth fitted axially to the machine are used. This device needs a reseating action to be done when it is to be operated after a couple of years. The unit is fitted with the shaft on its B side. Its cable cores of the cable and gasket should not get damaged when the screws for fixing the output direction of its feedback cable are tightened. It portrays standardized electrical connections. The motor incorporates an encoder with relative position detection. This product has a continuous current of 77A in standstill mode if the cooling option is natural convection.
The device uses cables with a minimum 8AWG cross-section for the power connection. The unit should feature protection against tipping and loading during storage and transport. Its feedback cable has poor adhesion property that prevents it from sticking in drag chains. The motor shaft has to be free of impact to avoid the possibility of the bearings getting damaged. The product with the drive controller offers an automatization system with rapid response. The device houses a laminated core that is embedded with permanent magnets. This unit can be used under poor environmental conditions. This MDD115D-N-020-N2L-130GA0 servomotor with a one-year warranty is sent to its destination in durable packaging.
Wake Industrial Warranty
