MDD115D-N-015-N2L-130PA0

Product Description

The MDD115D-N-015-N2L-130PA0 digital AC servomotor provided by Bosch Rexroth must be in a dry state during transport and storage. This servomotor features a couple of M8 tapped holes on the housing to fix lifting screws in accordance with DIN 580 specifications. The product comes without a blocking brake to aid its functioning. This device must use the lifting screws to pick it up when it has a blower fitting. The unit is ideal for use in tool-changing equipment and nibbling machinery. It is associated with a high power-to-weight ratio, overload capabilities and cyclic load capacity. This motor supports the attachment of belt pulleys or pinions directly onto the shaft.

The product has decreased output conditions when the favorable operating conditions have a deviation. This device has 6ms and 22ms shock duration for the lateral and longitudinal axes in that order. The unit features a standard pilot diameter. Its black housing coat is resistant to weathering and yellowing. This motor must be made to undergo a reseating process before using it after a two-year storage period. The product is related to the N balance class. This device uses either an angled type or a straight-type feedback connector based on its installation conditions. This MDD115D-N-015-N2L-130PA0 servomotor has backup support valid for a year and is delivered in durable packaging.

The motor permits the changing of the default orientation of the angle feedback connector to the desired position in increments of 90°. This unit is likely to get shut down automatically due to thermal reasons followed by the generation of an error message by the drive controller. It is possible to only solder the power cable if it has an inch diameter. The motor has 12 pins on its flanged socket intended for its feedback connector. This product features spigot nuts that have to be tightly screwed on their connectors during the motor connection.