Product Description
Bosch Rexroth is the world's leading manufacturer of ac servo motors, synchronous motors, spindle motors, drive controllers, control sections, brake choppers, and other equipment that is utilized in a wide range of industries.
The MDD115D-F-015-N2L-130PA0 model has an insulation level of F and a keyway shaft with a sealing ring on top to prevent lubricants from permeating the shaft. The AC servo motor's moment of inertia is very low due to the material used. The MDD115D AC servo motor has a balancing class of N, and temperatures should be kept between -20 and +80 degrees Celsius while transporting the motor. The model's design incorporates both electronic and permanent magnetic characteristics, and it spins at a nominal speed of 1500 revolutions per minute while delivering a significant amount of continuous torque with very little continuous current consumption. Due to its brushless design and oiled bearings, the servo motor is intended to have a long life and be resistant to extreme situations. The MDD115D AC servo motor has a 130 mm centering diameter and digital servo motor feedback. Additionally, it is essential to choose a drive controller that is compatible with the motor. The motor should be installed and operated by a highly trained technician to get the maximum performance out of it.
The model MDD115D-F-015-N2L-130PA0 must be operated at a temperature between 0 and 45 degrees Celsius, and the installation site must be between 0 and 1000 meters above sea level; otherwise, the necessary power values will not be achieved. Place strain reliefs in the conduit threaded joint of the motor power connection on the A-side of the motor housing to guarantee intrusion-free operation. Wake industrial offers a replacement warranty on this device (MDD115D-F-015-N2L-130PA0).
Wake Industrial Warranty
