Product Description
The MDD115C-N-015-N2M-130PB0 is a highly sophisticated and advanced industrial motor manufactured by the reputable Rexroth Indramat. This motor improves the operational efficiency of industrial machines by converting electrical energy to kinetic energy and accurately supplying the machines with the kinetic energy through an efficient transmission system. This industrial motor is an environmentally friendly device that does not generate a noise pressure level that exceeds 75 decibels during operation; the motor also features housing that contains a high metal content and can be easily recycled after the service life of the motor has been exhausted. The installation, configuration and general operation of this industrial motor are very straightforward and safe. However, to guarantee this operational safety, these operations should be carried out by highly trained industrial engineers according to internationally acceptable standards.
The MDD115C-N-015-N2M-130PB0 industrial servo motor contains an internal encoder which converts the physical operation of the motor into digital signals and transmits these signals to the drive controller through the motor feedback cable. The digital signals received by the drive controller are used to control the operation of the industrial motor according to pre-determined configurational parameters. Under ideal operating conditions, the MDD115C-N-015-N2M-130PB0 electrical motor does not generate a high amount of heat and can effectively regulate the operational heat it generates through a combination of natural conduction and convection; however, if the motor is used with an advanced industrial application that requires it to handle high radial loads or undergo continuous start-stop operations, then an additional air blower should be integrated with the motor to aid its temperature regulation process.
The MDD115C-N-015-N2M-130PB0 industrial motor is designed to be operated at an ambient temperature range that falls between 0 to about 40 degrees Celsius; however, if the motor is not in operation, it can be stored at a temperature as high as 80 degrees Celsius.
Wake Industrial Warranty
