Product Description
The MDD115C-N-015-N2L-180GA2 is a new-generation industrial servo motor produced by Rexroth Indramat under ideal industrial conditions and according to American and European quality standards. This electrical motor features a combination of old and trusted motor designs with some of the latest industrial innovations, this unique combination allows the motor to remain at the forefront of industrial motor designs. Unlike conventional industrial machines, the MDD115C-N-015-N2L-180GA2 electrical motor features a housing unit that provides it with complete protection against both solid and liquid foreign substances, it also maintains a high operational dynamics due to its favourable torque-inertia ratio. The MDD115C-N-015-N2L-180GA2 electrical motor is a brushless industrial device, during operation it does not generate a noise pressure that exceeds 75 decibels, this makes it perfect for operation at any time without the risk of environmental disturbance.
The MDD115C-N-015-N2L-180GA2 electrical motor contains special grease-lubricated ball bearings which help it to keep the frictional heat generated at its shaft within a permissible range during operation, the service life of these ball bearings is about 30,000 hours, however, this can be significantly reduced by the overloading of the motor during operation. The MDD115C-N-015-N2L-180GA2 electrical motor requires a continuous input current of about 40.2 amperes, at this current, it generates a continuous output torque of about 47-newton meters and can reach a nominal speed of about 1500 revolutions per minute.
At a motor housing temperature of 20 degree Celsius, this industrial motor generates a torque constant of 1.17-newton meters per ampere and a winding resistance of about 0.21 ohms. Also, the inductance of the windings is about 3.5 millihenry. The total weight of the MDD115C-N-015-N2L-180GA2 electrical motor is about 52 kilograms.
Wake Industrial Warranty
